March 4 > 7 / Bologna HALL 19 / BOOTH D61 SPECIAL OFFER It Expires on July 31, 2026 2026 Don't Miss the Chance! HIGH SCREW CLAMPING SYSTEM = NO LOSS OF CLAMPING FORCE Operator Side QUICK-CHANGE JAWS WITH INTERCHANGEABLE INSERTS www.gerardi.it ENG HEIGHTS AND LENGTHS FOR ANY APPLICATION NEW 100% ZERO-POINT READY AND COMPATIBLE WITH QUICK-CHANGE PLATES (INTERAXIAL DISTANCES 52 AND 96) NEW 5G VISES FOR 5 AXIS CNC BRING YOUR MACHINING TO NEW PEAKS Inside: GRIPMATIC VISES / 5G VISES / COMPACTGRIP VISES / MAXIGRIP VISES / QUICK CHANGE PLATES / TOMBSTONES / ZERO POINT SYSTEM / AUTOMATION KIT / MAGNETIC CHUCKS / STDFLEX VISES / XL VISES / MAGNETIC PLATES / FMS VISES / MULTIFLEX VISES / MULTITASKING VISES / STATIC TOOLHOLDER / DRIVEN TOOLS / CLASSIC & EVOLUTION ANGLE HEADS

COMPLETA GESTIONE TRAMITE CNC ZERO POINT & GRIP MATIC VISES READY ZERO POINT QUICK CHANGE READY Hydraulic or pneumatic vise double effect - Ideal for 5 axis machining centres CNC Management Full Automatic Vise Series Configurated for the complete handling by CNC, to automate the clamping process and increasing the productivity of your company. Unattended use possible, CNC manageable, ideal for automatic workpiece loading by robot Interface plate D C Type W UNCLAMP 2 74 Art.671C CLAMP Min opening Max opening A A1 C+B 88,9 105 CLAMP D 6,4 Art.671C Art.671A/B Jaws not included E Robot clamp to change the workpiece or the whole fixture Art.671A/B GripMatic Vise Art.670-T.2 CLAMP H ±0.02 A A D D E A1 Vise base pneumatic or Hydraulic, ideal for 5 axis machining centres. Art.671A/B Art.671A/B - 4x Calibrated screws (Art.83) - 2 Niplon o 2 Art.PN04 - No return valve (Art.PN16) Standard equipment: 15 10 B Art.670 Jaw width D E A1 Ø20H7 UNCLAMP ØG H7 W Art.671A/B UNCLAMP C CLAMP E W GripMatic Vise Art.670-T.2 15 10 UNCLAMP H ±0.02 E 15 10 CLAMP Art.671C H ±0.02 B Art.671A/B C B A1 A Ø20H7 ØG H7 H ±0.02 E UNCLAMP Ø20H7 ØG H7 W H ±0.02 UNCLAMP H ±0.02 CLAMP Zero Point plate Base lenght Jaw lenght C D E 80 106 52 Vise Base GripMatic Vise height height Art.670-T.2 D Pitch centering and fixing holes ART.670 Opening PNEUMATIC Air Pressure Force Code H 3 99 8,5 130,2 135 105 166 78 4 124 12 162 165 130 206 96 14 kN Pneumatic double effect or hydraulic * Pressure Opening Force ART.670 HYDRAYLIC LIST PRICE SPECIAL PRICE Code € € 7.67.0PN20 30BAR 38 kN 7.67.0ID20 1.826 1.400 140 Max 28,8 kN 7.67.0PN30 10BAR 30BAR 75 kN 7.67.0ID30 2.435 1.850 170 33,8 kN 7.67.0PN40 25 BAR 94 kN 7.67.0ID40 3.226 2.400 90 * Clamping Force: Half of the values reported represent the force applied by each jaw Art.671A Soft Jaw Art.243 Hardened grooved straight jaw plate Type Code € 2 3 4 7.67.1A200 173 7.67.1A300 233 7.67.1A400 308 Type Code € 2 3 4 1.65.17000 68 1.65.27000 75 1.65.37000 88 Art.671B Soft Narrow Jaw Art.245 Hardened smooth straight jaw plate Type Code € 2 3 4 7.67.1B200 197 7.67.1B300 260 7.67.1B400 343 Type Code € 1 2 3 4.24.51000 68 4.24.52000 75 4.24.53000 88 Art.671C Jaw for narrow width standard jaw plates Art.670G Straight plate with GRIP inserts Type Code € 2 3 4 7.67.1C200 197 7.67.1C300 260 7.67.1C400 343 Type Code € 2 3 4 7.67.0G200 142 7.67.0G300 153 7.67.0G400 198 INTERFACE PLATE FOR GRIPMATIC VISES - IDEAL FOR 5 AXIS CNC Art.670AP Fully-Automatic Interface plate for GripMatic vise Art.670PN automatic with air input through the machine table and possible to be controlled directly by the CNC. This plate can be fully tailored according the characteristics of the machine (workpiece positioning check and cleanliness). * Minimun price, PERSONALIZATION INCLUDED Air Type pressure Clamping 2 5 YEARS WARRANTY 14 kN ART.670 Pneumatic Code 100% Customizable Plate LIST PRICE €* 7.67.0AP20 3 Max 28,8 kN 7.67.0AP30 10BAR 4 33,8 kN 7.67.0AP40 EXPIRES DATE: 31.07.26 2.547 MADE in ITALY 2

ADVANCED TECHNOLOGY FOR 5 AXIS MACHINE ZERO POINT 5G VISES & ZERO POINT QUICK CHANGE READY Wide range of Quick Change Jaws NEW READY Bring your Machining to new Peaks H 5G-125L D 297 377 377 A1 150 Ganascia Fissa Fixed Jaw 125 A 2 Ganascia Mobile Movable Jaw 2 A2 Max Torque Art.5G 40 kN 130 mm Recommended Torque 120 Nm 200 Nm Recommended Force 26,5 kN C Fixed Support 125x105 Movable Support 125x105 H H1 Closing Stroke Max Clamping Force 25 C 6 mm CH19 Clamping Stroke 27 41 B B 5-axis vice Art.5G with quick-change jaws D Jaw Size A A1 A2 B clamping stroke C closing stroke D H H1 Code LIST PRICE € 125 x 105 min 104 / max 234 min 24 / max 154 min 10 / max 140 6 130 330 105 135 5G-125-330 3.500 125 x 105 min 204 / max 334 min 124 / max 254 min 110 / max 240 6 130 430 105 135 5G-125-430 3.600 125 x 105 min 274 / max 404 min 194 / max 324 min 180 / max 310 6 130 500 105 135 5G-125-500 3.700 125 x 150 min 204 / max 334 min 124 / max 254 min 110 / max 240 6 130 430 150 185 5G-125H-430 3.900 125 x 150 min 274 / max 404 min 194 / max 324 min 180 / max 310 6 130 500 150 185 5G-125H-500 4.000 125 x 150 min 404 / max 534 min 324 / max 454 min 310 / max 440 6 130 630 150 185 5G-125H-630 4.200 5G VISE JAWS ON OFFER Art. 5B Code LIST PRICE € SPECIAL PRICE € 5G-125-5B 120 99 Code LIST PRICE € SPECIAL PRICE € 5G-125-5K 350 299 Code LIST PRICE € SPECIAL PRICE € 5G-125-5U 650 599 Soft machinable jaw REDUCTION 18% * Solo se acquistate con la morsa Art. 5K Jaw with CompactGrip inserts Art. 5U Floating movable jaw with inserts Art. 812 5 YEARS WARRANTY Art. 5W Adjustable fixed jaw with inserts Art. 812 Art. 5Z Adapter for custom jaws Art. 5L Workstop EXPIRES DATE: 31.07.26 Code LIST PRICE € SPECIAL PRICE € 5G-125-5W 600 549 Code LIST PRICE € SPECIAL PRICE € 5G-125-5Z 210 199 Code LIST PRICE € SPECIAL PRICE € 5G-125-5L 50 45 MADE in ITALY 3

COMPACT, RIGID AND ACCURATE. IDEAL FOR 5 AXIS CENTRES ZERO POINT COMPACT GRIP W SINGLE / DOUBLE SELF-CENTERING Magnetic Workstop Art. 370EM Slide locking plate included with Art.650 W Type Max opening 1 50 2 88 12kN 4mm B C 22kN W A D VISES READY Std Equipment: 1 box wrench Art.375, 1 workstop Art.370EM, 1 pair of self-centering key-nuts Art.297, 2 positioning key-nuts Art.650G T slot 16 mm, 1 Art.650F slide locking plate VISES SINGLE / DOUBLE SELF-CENTERING Tipo 1 ZERO POINT READY Self centering vises with reversible jaws - Ideal for 5 axis machining centres Art.650 & QUICK CHANGE 3 E 32kN 123 Type 2&3 Jaw width Jaw Height A 54 94 134 96 136 176 216 133 183 233 283 333 Base Lenght B Base Height C D 65 45 79,9 65 38 89,9 65 38 89,9 89 57 124,9 89 57 124,9 Jaw Base E 80 120 160 120 160 200 240 160 210 260 310 360 Kg Cod. LIST PRICE € SPECIAL PRICE € 1,9 2,7 3,4 3,6 4,4 5,2 5,8 9,1 10,9 12,8 14,8 17 7.65.01080 7.65.01120 7.65.01160 7.65.02120 7.65.02160 7.65.02200 7.65.02240 7.65.03160 7.65.03210 7.65.03260 7.65.03310 7.65.03360 793 915 1.036 975 1.097 1.218 1.341 1.584 1.826 2.070 2.435 2.678 649 749 849 700 800 900 1.000 1.150 1.250 1.350 1.650 1.850 Art.651H Aluminum riser for CompactGrip vises REDUCTION 20% * Savings on Riser only if purchased with the vise Intermediate Fixed Jaw Art.650X A C A1 Type A A1 B B1 C Cod. LIST PRICE € SPECIAL PRICE € 1 18 24 8 20 50 7.65.0X1000 175 140 2 22 28 13 23 88 7.65.0X2000 203 160 3 22 29 18 28 123 7.65.0X3000 226 180 B1 B PYRAMIDAL SUPPORT FOR 5TH AXIS CENTRES - INCLUDED MOUNTED & ALIGNED VISES Standard equipement: 12 Vise holding clamps Art.298 CGR, 1 Eyebolt, 1 Centering pin, Pair of keynuts Art.297 Art.643H MOUNTING & ALIGNEMENT INCLUDED Aluminum pyramidal support, it permits the simultaneous mounting of 3 CompactGrip vises thus increasing the working space and allowing the contemporary machining of multiple workpieces. Type Height Cod. LIST PRICE € 1 (Ø200) 170 7.64.3H100 1.853 2 (Ø308) 136 7.64.3H200 2.201 3 (Ø360) 190 7.64.3H300 2.432 MAXIGRIP VISES KIT #1 KIT #2 KIT #3 Art. 643H + N°3 Art.650 T.1x120 Art. 643H + N°3 Art.650 T.2x200 Art. 643H + N°3 Art.650 T.3x210 * Check the machine spindle turning 60° LIST PRICE € SPECIAL PRICE € Code LIST PRICE € SPECIAL PRICE € Code LIST PRICE € SPECIAL PRICE € 6501120-G11643H1-60 4.598 3.400 6502200-G11643H2-30/45 5.855 4.200 6503210-G11643H3-45 7.910 5.300 VISES E A W Slide locking plate included with Art.685 *45° *45° 30° Code MaxiGrip vise - 3 clamping in 1 - Self-Centering, Double and Single SINGLE / DOUBLE SELF-CENTERING Art.685 * Check the machine spindle turning Art.685 Type 4x270 4x420 kN 41 A A1 A2 A3 200 83 104 35 344 155 248 107 W 158 E Kg Code LIST PRICE € SPECIAL PRICE € 270 28,5 76854270 2.979 2.299 420 40 76854420 3.948 3.099 E Kg Code LIST PRICE € SPECIAL PRICE € 270 25 76844270 2.550 1.999 420 36 76844420 3.519 2.799 A1 Art.684 MaxiGrip vise - Only Self-centering Type 4x270 4x420 Pull Studs T.3 for quick change plate with pitch 96 5 YEARS WARRANTY kN 41 A A1 A2 A3 200 - 104 - 344 - 248 - EXPIRES DATE: 31.07.26 W 158 MADE in ITALY 4

COMPACT, RIGID AND ACCURATE. IDEAL FOR 5 AXIS CENTRES QUICK CHANGE PLATES Quick change plates for compactgrip vises - Ideal for 5 axis machines A mechanical system for the quick positioning and clamping of fixtures for securing workpieces that stands out for its wide range of variations, offering a solution suitable for every type of machine tool Features and Advantages • • • • • • • • • • • • Art.80P 400x400 Zero Point Plate Quick machine set-up Reduction of downtime Modularity and versatility Incredibly light For any type of machine center Production increasing Available with double pitches Infinite possible combinations Compact design handling Compatible risers System compatible with standard pitch 52 and 96 HRC Hardened HRC 55±2 Reduce downtime and Accelerate your production Art. 660 MECHANICAL QUICK CHANGE Type C D E Kg Code LIST PRICE € SPECIAL PRICE € 1-2 27 116 150 3 9.66.05200 803 549 3 27 156 190 5,2 9.66.09600 1.156 849 1-2 27 126 150 3 9.66.0S520 651 449 C F=52 Rectangular plate F=96 660S 660R Hardned with machineable part holes free rectangular plate. Customization Excluded F=52 Rectangular reduction plate F=52 3 F=96 F=52 Round plate 3 F=96 Hardned with machineable part holes free round plate Customization Excluded 661S Available Quick Change Plates for any kind of Rotary Plates or 4° Axis Round reduction plate F=52 3 F=96 F=52 27 156 190 5,2 9.66.0S960 888 649 27 126 150 3,75 9.66.0R210 710 449 156 120 27 3 9.66.15200 770 549 196 175 27 5,2 9.66.19600 1.125 849 156 27 3,8 9.66.1S5200 710 449 196 27 6 9.66.1S9600 1.183 649 250 24 10 9.66.1S960-250 1.680 1.450 300 24 15 9.66.1S960-300 1.785 1.550 158 27 3,75 9.66.1R210 888 449 Art.660B For type 1-2 plates For type 1-2 plates Type Code LIST PRICE CAD. € 1-2 9.66.0B100 32 3 9.66.0B200 34 D Art.660 C D Art.660R C E Aluminium base riser for quick-change plate, can be mounted with brackets or via Zero Point 5 YEARS WARRANTY D Art.661S D Art.661 E D Art.661R Standard equipment: 4 Pull-studs Art.660B Art.661S Quick change plate pull studs D Art.660S E 1-2 (Also with bar passage) 661R E E E 1-2 661 C EXAMPLE Mounting of a round quick change plate for CompactGrip vises Also with bar passage Pull Stud Art.660B Self centering Chuck Rotary Plate Haas Hrt200 EXPIRES DATE: 31.07.26 Interfaced plate Art.62B MADE in ITALY CompactGrip vises Art.650 T.3 5

CAST IRON TOMBSTONE + STEEL VISES = STABILITY AND PRECISION TOMBSTONES Solid cast iron cast with double stress relieving heat treatment - Ideal for orizontal machining centres made in italy Base / Height reduction: €220 STANDARD JAPANESE Art.53 5th faccia lavorabile A A H B B C Code Art.53 B A B C D H Kg LIST PRICE € SPECIAL PRICE € Cod. B2 PLUS LIST PRICE € Kg 8.53.B00080 260 400 45 - 550 197 1.891 1.550 8.53.B20080 182 2.409 1.950 45 - 660 228 2.182 1.690 8.53.B20081 204 2.734 2.050 8.53.B00100 260 500 45 - 650 255 2.466 2.000 8.53.B20100 238 3.088 2.400 8.53.B00105 260 500 45 - 750 284 2.556 2.000 8.53.B20105 254 3.201 2.500 8.53.B00115 310 500 45 - 900 383 3.623 2.700 8.53.B20115 354 4.398 3.300 8.53.B00171 360 500 45 - 700 356 3.395 2.500 8.53.B20171 326 4.122 3.050 8.53.B00180 360 630 45 - 820 452 4.302 3.200 8.53.B20180 427 5.383 4.200 *8.53.B00211 510 630 45 - 860 5.976 3.850 8.53.B20211 7.256 4.350 593 One integral G30 cast iron casting milled with double stressrelieving heat treatment. Wall thickness 43-45mm. Tolerance +12 / -5 mm B Rough casting with machined and hand scraped base face for direct clamping on Japanese standard pallet.Base with 4 precision holes Ø20F7 and bottom threads M16 with precise pitch dimensions for the use of our Zero Point or to be interface with other pallets or head plates. Ready for installation and to be machined for reset with machine axis. Tolerance +12 / -5 mm C Cube completely finished with wall thickness roughly 38-40mm. Tolerance ± 0,02 mm SPECIAL PRICE € 8.53.B00081 260 400 61 A * Solo per pallet a cave a "T" Code H B D B C B Kg LIST PRICE € SPECIAL PRICE € Cod. Kg LIST PRICE € SPECIAL PRICE € 50 660 244 2.392 1.800 8.55.B20052 206 2.903 2.150 700 331 3.194 2.400 8.55.B20053 303 3.878 2.900 8.55.B00054 510 500 210 55 600 316 3.103 2.300 8.55.B20054 301 3.767 2.800 8.55.B00170 640 450 160 55 820 460 4.434 3.200 8.55.B20170 433 5.384 4.000 8.55.B00172 640 630 210 55 850 545 5.282 3.540 8.55.B20172 520 6.414 4.500 8.55.B00190 810 450 160 65 800 604 5.922 4.040 8.55.B20190 782 7.189 4.900 Code C H 50 Art.57 H D 8.55.B00052 410 400 160 E B A B2 PLUS 8.55.B00053 510 500 160 A A Art.55 B Art.57 B A B C E H Kg LIST PRICE € SPECIAL PRICE € Cod. B2 PLUS Kg LIST PRICE € SPECIAL PRICE € 8.57.B00100 210 500 50 80 750 157 1.802 1.550 8.57.B20100 155 2.117 1.850 8.57.B00110 280 500 50 80 850 235 2.169 1.950 8.57.B20110 241 2.661 2.300 8.57.B00120 240 500 50 110 850 218 2.090 1.850 8.57.B20120 216 2.608 2.250 8.57.B00130 310 500 50 150 850 269 2.516 2.050 8.57.B20130 232 3.034 2.550 8.57.B00140 310 630 50 150 950 327 2.846 2.450 8.57.B20140 325 3.359 2.650 B2 1mm overstock on each B2 PLUS Art.55 C A side. Ready for installation and to be machined for reset with machine axis. E Integral cube with calibrated holes and solid threads. Tolerance ± 0,02 mm F Integral cube with hardened bushing 100 Cr6 and stainless steel helicoils. Tolerance ± 0,02mm INTEGRAL VISE-CUBE WITH BASE WITH WALL TICKNESS 20-35MM A Art.53B1 Light Cube Finished Base A PRICE REDUCTION UP TO 24% E H C B E B Art.55B1 2 sides tombstones light Finished Base C E H Kg Code LIST PRICE € SPECIAL PRICE € A B 210 400 45 25 750 167 8.53.B10055 1.891 1.500 410 260 400 45 25 850 229 8.53.B10085 2.280 1.800 260 500 45 25 750 234 8.53.B10105 2.488 1.950 410 360 500 50 30 900 400 8.53.B10182 3.523 2.700 360 630 45 30 950 468 8.53.B10185 4.218 460 630 45 35 950 634 E= Wall tickness 8.53.B10205 5.265 H B B PRICE REDUCTION UP TO 24% E Wall Thickness 20-35mm A C A E D Wall Thickness 20-35mm C D E H Kg Code LIST PRICE € SPECIAL PRICE € 400 110 55 25 750 193 8.55.B10045 2.154 1.700 400 160 55 25 850 239 8.55.B10050 2.390 1.900 510 500 160 55 25 750 277 8.55.B10053 2.813 2.200 3.250 510 500 210 55 30 900 402 8.55.B10085 3.602 2.800 4.250 640 630 210 55 30 950 553 8.55.B10172 4.849 3.700 E= Wall tickness 5 YEARS WARRANTY EXPIRES DATE: 31.07.26 MADE in ITALY 6

THE FIRST STEP TOWARDS AUTOMATION ZERO POINT SYSTEM Set up times reduced of 90%, repeatability within 0,005 mm - Ideal for vertical & horizontal machining centres Code kN 1 2 3 9.66.41000 5,4 9.66.42000 10 DISPONI- 9.66.43000 16 Ø84-Ø110Ø138 LIST PRICE € SPECIAL PRICE € 645 499 971 599 1.218 999 NON BILE 90- Code kN 1 2 3 9.66.51000 5,4 9.66.52000 10 DISPONI- 9.66.53000 16 LIST PRICE € SPECIAL PRICE € 520 399 843 499 1.097 899 NOT BILE 30-42-47 68 0-Ø1 Double Effect kN Type Art.664S 90-12 WITH FLANGE DOUBLE EFFECT AIR+SPRINGS Type Code kN Double Effect kN 1 2 3 9.66.4S100 5,4 9.66.4S200 10 9.66.4S300 16 Ø138-Ø188-Ø215 BUILT-IN Art.665 42-48-62 12-15-15 90 Ø138 Ø168 Double Effect kN Type 168 0-Ø Ø12 20-20-25 Ø138-Ø178-Ø213 WITH FLANGE Art.664 Art.665S LIST PRICE € SPECIAL PRICE € 12,7 747 599 27 1.058 699 40 1.218 999 BUILT-IN DOUBLE EFFECT AIR+SPRINGS Type Code kN Double Effect kN LIST PRICE € SPECIAL PRICE € 1 2 3 9.66.5S100 5,4 12,7 623 499 9.66.5S200 10 27 933 599 9.66.5S300 16 40 1.097 899 12-15-15 20-20-25 50-55-70 90 Ø138 Ø168 SINGLE PNEUMATIC: THE HERMETIC 32-45-45 MULTIPLE PNEUMATIC: THE CLASSIC Ø84-Ø110Ø138 Standard Equipment: 1 pull-stud Art.11A, 1 Teflon cup with O-Ring Art.9 Clamping force 5 ÷ 40 kN / Holding force more than 60 kN / Pneumatic release 6 ÷ 14 bar / Axial and radial compensation thanks to elastic integral collet / Double pull-stud centering for Max rigidity / Air cleaning / Only for SINGLE ZERO POINT (S version): 4 KEYWAYS and DOUBLE EFFECT FUNCTION PNEUMATIC ZERO POINT KIT INTERFACED BASE PLATES KIT #1 E #2 POSITIONING & LOCKING INCLUDED VERTICAL CNC KIT #1 KIT #3 E #4 STANDARD POSITIONING & LOCKING INCLUDED, SPECIFIC LOCKING EXTRA* HORIZONTAL CNC KIT #2 200 400/500 30 0/6 /50 0 40 KIT #3 i VERTICAL CNC 600/800 KIT #4 200 5TH AXIS CNC Ø425/500/630 400 i i 400/500 i 58 BASE PLATE Art.81P LIST PRICE € SPECIAL PRICE € 200x400 (i=200) 2.779 1.749 200x500 (i=250) 2.849 1.849 Art.80P LIST PRICE € SPECIAL PRICE € 400x400 (i=200) 500x500 (i=250) 630x630 (i=300) 4.978 3.299 5.210 3.499 5.707 3.999 BASE PLATE 58 58 58 BASE PLATE Art.81P LIST PRICE € SPECIAL PRICE € 400x600 (i=200) 7.176 4.699 400x800 (i=300) 7.479 4.899 LIST Art.82P ROUND BASE PLATE PRICE € Ø425 (i=200) Ø500 (i=250) Ø630 (i=300) SPECIAL PRICE € 5.210 3.399 5.187 3.499 5.788 3.999 INTERFACE PLATES FOR ZERO POINT BASE PLATES 400/500 Art.61iE Art.60iE 200 400/500/630 Art.61iC 38 Art.61iE i Art.61iC Art.61iE i Ø425/500/630 400 200 600/800 Art.60iC Art.61iC i 38 i 400/500 38 38 Art.61iC SMOOTH LIST PRICE € SPECIAL PRICE € 200x400 (i=200) 955 599 200x500 (i=250) 1.027 649 INTEGRAL GRID Art.61iE LIST PRICE € SPECIAL PRICE € 200x400 (i=200) 1.158 649 200x500 (i=250) 1.275 749 Art.60iC LIST PRICE € SPECIAL PRICE € Art.61iC SMOOTH LIST PRICE € SPECIAL PRICE € 400x400 (i=200) 500x500 (i=250) 630x630 (i=300) 1.169 863 1.408 1.039 400x600 (i=200) 1.789 1.320 1.765 1.303 400x800 (i=300) 2.384 1.760 Art.60iE LIST PRICE € SPECIAL PRICE € INTEGRAL GRID Art.61iE LIST PRICE € SPECIAL PRICE € 400x400 (i=200) 500x500 (i=250) 630x630 (i=300) 1.536 1.040 2.008 1.360 400x600 (i=200) 2.125 1.440 3.152 2.136 400x800 (i=300) 3.022 2.048 SMOOTH INTEGRAL GRID 5 YEARS WARRANTY EXPIRES DATE: 31.07.26 Art.62iC LIST PRICE € Ø425 (i=200) Ø500 (i=250) Ø630 (i=300) 1.253 924 1.431 1.056 1.669 1.232 Art.62iE LIST PRICE € SPECIAL PRICE € Ø425 (i=200) Ø500 (i=250) Ø630 (i=300) 1.536 1.040 1.960 1.328 2.621 1.776 SMOOTH INTEGRAL GRID MADE in ITALY SPECIAL PRICE € 7

ALL THE COMPONENTS ARE BUILT COMPLETELY WITH HIGH RESISTANCE STEEL AND CASE HARDENED STANDARD FLEX VISES Innovative comb system for quick pull-down jaw plates change - Ideal for vertical machining centres Art.1A X Std Equipment: 1 workstop, 2 positioning key-nuts for 16 mm slot, 2 inserts Art. 291, 1 box wrench, 1 “T” wrench (Single Clamping) 4 Holding Clamps Art.298 StandardFLEX series precision modular vise Type Max opening Jaw width Jaw Height Base Lenght Code 2 150 121 mm 38 345 420 25kN 3 30kN LIST PRICE € SPECIAL PRICE € 1.1A.20000 944 749 1.1A.32000 1.135 799 520 1.1A.33000 1.309 899 455 1.1A.42000 1.443 1.099 555 1.1A.43000 1.587 1.149 400 655 1.1A.44000 1.730 1.249 200 495 1.1A.52000 1.883 1.399 595 1.1A.53000 2.255 1.699 695 1.1A.54000 2.634 1.949 W A 200 B 146 mm 300 D 48 200 4 30kN 5 40kN 300 171 mm 300 58 196 mm 63 400 REDUCTION UP TO 20% * When bought with a complete vise * Art.230B Soft * Art.230C Smooth * Art.230E With step * Art.230F Prismatic * Art.138 Square stack type jaw * Art.150 Stack type prismatic jaw * Art.212 Mobile intermediate with double step Art.297 * Art.257 Hydraulic hand Positioning screw clamping Key Nuts ≠16 device EXTRA LONG VISES Vises with the extra large base dimension, much longer than std vises - Ideal for vertical machining centres Art.21 X Std Equipment: 1 workstop, 2 positioning key-nuts for 16 mm slot, 2 inserts Art. 291, 1 box wrench, 1 “T” wrench (Single Clamping) XL modular vise with standard dotation 6 Holding clamps Art. 298 Type Max opening Jaw width Jaw Height Base Lenght Kg Code LIST PRICE € SPECIAL PRICE € 2 320 125 mm 40 520 17 2.21.23200 1.170 800 150 mm 50 580 32 2.21.33600 1.454 1.000 680 35 2.21.34600 1.610 1.150 766 52 2.21.45000 1.865 1.350 866 56 2.21.46000 2.030 1.450 966 61 2.21.47000 2.203 1.550 25kN 3 30kN A 360 460 W B 500 4 30kN 600 175 mm 60 700 D REDUCTION UP TO 20% * Art.138 A square stack type * Art.150 Prismatic stack type * Art.217 Prismatic Movable * Art.313 Magnetic parallel plates * Art.230S Serrated jaw plate Art.297 Positioning Key Nuts ≠16 PARALLEL MAGNETIC PLATE Wide range of heights available on page 4.27 - General price list w17 F O R V I S E S S TA N D A R D & S TA N D A R D F L E X A R T. 1 e A R T. 1 A Thickness: 2,8mm Art.414 Also Available Universal Parallel magnetic plates Art.310 REDUCTION up to 43% Art.311 Pair of guided parallels magnetic plates Price each in case of set purchase 6 pairs of parallel bars (Art.313-313R) Price each in case of set purchase 10 pairs of parallel bars (Art.313-313R) Type LIST PRICE EACH € PRICE EACH € KIT PRICE € PRICE EACH € KIT PRICE € 1 75 51 306 - - 2 95 67 402 - - 3 119 77 462 72 720 4 139 92 552 82 820 5 159 102 612 92 920 6 180 123 738 102 1.020 5 YEARS WARRANTY * When bought with a complete vise EXPIRES DATE: 31.07.26 8

REGULATED AND STEADY TIGHTENING AUTOMATION KIT Unit with pneumatic control and single effect cylinder - Ideal for vertical machining centres Air Art.402 frontal pneumatic valve Art.394 power unit with air control valve VISE NOT INCLUDED 250 N°1 CLAMPING Art.392 Type Stroke Art.271 2 Art.271 IDRAULIC cylinder with sigle effect Art. 403 Hydraulic pipe Multispiral (1,5m) 290 Art.396B base block for PNEUMATIC control 156 FOR VISES STANDARD & STANDARDFLEX ART. 1 and ART.1A 26 3 4 40 5 VISE NOT INCLUDED Also available units with solenoid valves electromagnetics for CNC and Art.391 & Art.391A with Electric Control by CNC *Art.405H (Not Included) 130 348 Code LIST PRICE € SPECIAL PRICE € 4.39.22000 1.910 1.499 4.39.23000 1.922 1.499 4.39.24000 1.956 1.499 4.39.25000 2.152 1.599 Suitable galvanized steel pipe Ø6 (m1,0) Codice: 4.40.5H000 MAGNETIC CHUCKS SQUARE WITH Electro-permanent system for milling operations POLE The Gerardi magnetic chuck offers powerful and precise magnetic clamping, optimizing setup time and increasing productivity. It is the ideal solution for clamping on machine tools in a safe and energy-efficient manner. Available with 50 and 75 poles, it is ideal for milling and other operations Technical Features & Advantages FLEXIBLE pole extension L FIXED ROUNDED pole extension D C C B D Polar Pitch A Pole 50 Art.89P-50 B C D H L Kg Poli PTOT Kg For CAST IRON / STEEL Art.89P (50) LIST PRICE € SPECIAL OFFER € 360 50 60 55 360 57 25 10.000 89P5363625 2.601 1.999 370 50 60 55 635 90 40 16.000 89P5376340 4.182 3.199 360 50 60 55 790 108 50 20.000 89P5367950 5.202 3.999 580 50 60 55 940 200 96 38.400 89P5589496 9.996 7.499 Magnetic Chuck Precision Modular vises matchable for gang operations and pneumohydraulic clamping (StandardMatic series) A ble with o availa Soon als pitch 88 P75 and Art.89U Thanks to the Microprocessor Controller is possible operate quickly and easily with one or multiple magnetic plates at the same time. More Versatility Milling Operations The Electropermanent system easily adapts to pieces of various geometries and complexities. This is the only magnetic chuck that will not loose force when the part is machines at a distance from the magnetc chuck. Uniform clamping / Totally free working surface / Easy to Use / Elimination of machining vibration / Energy Saving / Maximum Safety / Quick workpiece setup and removal / Better finishing grade / Reduced tools consumption / Little maintenance compared to conventional clamping systems 2 YEARS WARRANTY EXPIRES DATE: 31.07.26 MADE in ITALY 9

FOR SINGLE, DOUBLE AND SELF-CENTERING CLAMPING FMS VISES VISES SINGLE / DOUBLE SELF-CENTERING For single, double and self-centering clamping - Ideal for vertical & horizontal machines Also perfect for 5-axis machining centers Art.855A Art.814 + Art.805V + (n°2) (n°2) (n°2) Base Body Self-Centering Only Art.805V Art.805V Type W Art.814 Art.814 2 Art.868A 3 4 Code LIST PRICE € 5.86.82400 2.156 5.86.82500 2.630 5.86.82600 2.813 5.86.83500 2.642 5.86.83600 3.311 5.86.84600 3.395 THE STARTING POINT FOR ALL YOUR COMBINATIONS Art.855 Art.855A Art.855 Base Body 3 in 1 Base Body Self-Centering Only W Type W 2 (94mm) 25kN 3 A (124mm) 30kN C 4 (144mm) 30kN B Base height Base width A B 90 Base lenght C Code LIST PRICE € Code LIST PRICE € 400 5.85.52400 1.393 5.85.5240A 1.476 500 5.85.52500 1.885 5.85.5250A 1.986 600 5.85.52600 2.082 5.85.5260A 2.157 500 5.85.53500 1.809 5.85.5350A 1.902 600 5.85.53600 2.502 5.85.5360A 2.611 600 5.85.54600 2.326 5.85.5460A 2.384 95 100 125 120 145 Double Clamping Configuration Art.860 Art.805C Double vise with serrated jaws Art.810 Art.810 Type 2 3 4 Art.863 Art.805N Cod. LIST PRICE € SPECIAL PRICE € 5.86.02400 5.86.02500 5.86.02600 5.86.03500 5.86.03600 5.86.04600 1.830 2.327 2.521 2.310 3.000 2.987 1.400 1.800 1.950 1.800 2.300 2.300 Double vise with step jaws Art.810L Type 2 3 4 Cod. LIST PRICE € SPECIAL PRICE € 5.86.32400 5.86.32500 5.86.32600 5.86.33500 5.86.33600 5.86.34600 1.992 2.485 2.681 2.469 3.160 3.167 1.550 1.900 2.100 1.900 2.450 2.450 5 YEARS WARRANTY IDEAL FOR 5 AXIS MACHINING CENTERS COMPOSE YOUR VISE WITH THE HUNDREDS OF JAWS AVAILABLE Art.810L Art.855A VISES SINGLE / DOUBLE SELF-CENTERING Serrated side Smooth side * Self-centering Configuration Only * For self-centering configuration ONLY, spacer Art.850T included in the price Art.855A Art.810 + Base Body Self-Centering Only 2 Serrated jaws Type Art.810 Art.860A Art.810 4 1.680 2.178 2.372 2.142 2.832 2.736 Type * LIST PRICE € 2 3 Art.855A + * LIST PRICE € Art.810L Base Body Self-Centering Only 2 Step jaws Art.863A Art.810L Art.810L 2 3 4 EXPIRES DATE: 31.07.26 1.757 2.251 2.446 2.216 2.905 2.831 10

ALL THE COMPONENTS ARE BUILT COMPLETELY WITH HIGH RESISTANCE STEEL AND CASE HARDENED ZERO POINT MULTIFLEX VISES For multiple clamping from 1 to 19 workpieces of various sizes - For vertical & horizontal machines W INCLUDED 6 holding clamps Art.298 Art.600 Type 0 C +- 0,02 1 32/25 50 2 40 75 3 60 100 20kN 30kN 40kN D 300 400 500 600 700 400 500 600 700 800 900 700 800 900 1000 READY READY W B A2 A3 D C Art.605 Fixed and movable jaws Art.600W B ZERO POINT W A1 Std Equipment : 1 “T” wrench, 2 positioningkeynuts and 4 workstops. Each vise is supplied for 4 workpieces clamping. & QUICK CHANGE W 49 74 99 Art.613 - double clamping movable jaws Art.609 - fixed and movable jaws with A2 integral step Art.606 Art.611 (* Types supplied for 3 workpieces clamping) A1 mm Code LIST PRICE € SPECIAL PRICE € A2 mm Code LIST PRICE € SPECIAL PRICE € A3 mm Code. LIST PRICE € SPECIAL PRICE € 4x8 4x33 4x58 4x83 4x108 4x12 4x37 4x62 4x87 4x112 4x137 4x59 4x84 4x109 4x134 6.60.01300 6.60.01400 6.60.01500 6.60.01600 6.60.01700 6.60.02400 6.60.02500 6.60.02600 6.60.02700 6.60.02800 6.60.02900 6.60.03700 6.60.03800 6.60.03900 6.60.03100 1.229 1.335 1.454 1.585 1.771 1.598 1.715 1.848 1.979 2.157 2.349 2.289 2.477 2.672 2.927 749 849 949 1.049 1.149 1.099 1.249 1.349 1.449 1.549 1.749 1.649 1.749 1.949 2.149 * 3x19 4x23 4x48 4x73 4x97 * 3x28 4x24 4x49 4x74 4x99 4x124 4x44 4x69 4x94 4x119 6.60.61300 6.60.61400 6.60.61500 6.60.61600 6.60.61700 6.60.62400 6.60.62500 6.60.62600 6.60.62700 6.60.62800 6.60.62900 6.60.63700 6.60.63800 6.60.63900 6.60.63100 1.859 1.936 2.054 2.184 2.374 2.312 2.434 2.568 2.700 2.889 3.082 3.119 3.310 3.500 3.756 1.200 1.300 1.400 1.500 1.600 1.550 1.650 1.750 1.850 1.950 2.050 2.150 2.250 2.450 2.650 * 3x21 4x46 4x71 4x96 4x121 4x34 4x59 4x84 4x109 4x134 4x158,5 4x77 4x102 4x127 4x152 6.61.11300 6.61.11400 6.61.11500 6.61.11600 6.61.11700 6.61.12400 6.61.12500 6.61.12600 6.61.12700 6.61.12800 6.61.12900 6.61.13700 6.61.13800 6.61.13900 6.61.13100 1.859 1.936 2.054 2.173 2.374 2.312 2.434 2.568 2.700 2.889 3.082 3.119 3.310 3.500 3.756 1.200 1.300 1.400 1.500 1.600 1.550 1.650 1.750 1.850 1.950 2.050 2.150 2.250 2.450 2.650 FOR MAGNETIC PARALLEL PLATES AND PARALLEL JAW PLATES REDUCTION up to 20% Art.616 Pair of magnetic parallel plates for Art. 600 REDUCTION up to 20% Art.610E Parallel jaw plate for Art.606 When bought with a complete vise When bought with a complete vise MULTITASKING VISES ZERO POINT Art.640 Type 1 Code 3 2 4 of 2 Art.645T jaws instead Art.645E 3,5 3x166 3x266 Standard equipment : 1 workstop,1 exagonal wrench, pair of positioning key-nuts Art.297 /99 74 75 2.331 2.712 2.841 SPECIAL PRICE € 1.049 1.249 1.899 1.999 Type Simple riser for Art.640 vise MOUNTING INCLUDED Compatible 1 2 3x166 LIST PRICE € 653 769 785 1.191 SPECIAL PRICE € 400 450 600 900 Compatible Art.63 Art.64 Type 1 2 2 Height H 100 125 163 Code 9.63.10000 9.63.20000 9.64.20000 LIST PRICE € SPECIAL PRICE € 1.247 2.108 949 1.449 2 YEARS WARRANTY Art.645D Serrated Jaw 3x266 7.64.1H100AL 7.64.1H200AL 7.64.1H3166AL 7.64.1H3266AL /100 /100 /100 /100 Code Art.645C Smooth Jaw H=100 Art.641H 5 85/115 1.896 Art.645B Soft Jaw /10 6.64.01000 6.64.02000 7.64.03166 7.64.03266 LIST PRICE € Steel risers with zero point for Art.640 for quick change. Standard equipment : 1 pull-stud Art.10S / 11S 1 teflon cap with O-ring Art.9, 1 shoulder calibrated screw Art.79 H Art.645E Step Jaw Art.645F Prismatic Jaw Art.645T Grip Jaw (Supplied on request) 3.517 EXPIRES DATE: 31.07.26 ZERO POINT READY READY Self-centering and eccentric vises - Ideal for 5 axis machining centres ! Possible request & QUICK CHANGE Type Code 1 2 3 LIST PRICE € 6.64.5B100 6.64.5B200 6.64.5B300 105 125 163 77 93 121 Type Code 1 2 3 LIST PRICE € SPECIAL OFFER € 6.64.5C100 6.64.5C200 6.64.5C300 105 125 163 77 93 121 Type Code 1 2 3 LIST PRICE € SPECIAL OFFER € 6.64.5D100 6.64.5D200 6.64.5D300 105 125 163 77 93 121 Type Code 1 2 3 LIST PRICE € SPECIAL OFFER € 6.64.5E100 6.64.5E200 6.64.5E300 118 137 175 87 102 130 Type Code 1 2 3 LIST PRICE € SPECIAL OFFER € 6.64.5F100 6.64.5F200 6.64.5F300 132 149 189 98 111 141 Type Code 1 2 3 LIST PRICE € SPECIAL OFFER € 6.64.5T100 6.64.5T200 6.64.5T300 132 149 189 MADE in ITALY SPECIAL OFFER € 98 111 141 11

SAVE PURCHASING STATIC TOOL HOLDERS - CHOOSE FROM A WIDE RANGE ON THE CATALOGUE STATIC TOOL HOLDERS A wide range of driven tools with an unbeatable price / quality ratio SCAN THE QR CODE AND CHOOSE FROM A WIDE RANGE ON THE CATALOGUE DIN 69880 Ask the password to your supplier EXAMPLE KIT 1 EXAMPLE KIT 1 RISPARMI IL 10% 3 PCS 4 PCS PURCHASING 3 STATIC TOOLS DIN RISPARMI IL 15% PURCHASING 4 STATIC TOOLS DIN 69880 69880 DRIVEN TOOLS COMPATIBILITY A quick overview of manufacturers on which all our Driven Tools can be mounted. BMT 55 Nexturn BMT 45 DOOSAN Hwacheon Hyundai WIA Hardinge DMG MORI Cmz BMT 55 DOOSAN Hwacheon Hyundai WIA BMT 85 2 YEARS WARRANTY SL ZL DL from P. 5.109 to P. 5.118 MIYANO Goodway MIYANO Muratec NAKAMURA Cmz NAKAMURA G3 L= 104,85 HAAS Manufacturer NAKAMURA G4 L= 117,55 QTN 1 VDI 40 QTN 2 VDI 40 MAZAK Samsung HQ EXPIRES DATE: 31.07.26 Ø38 Ø45 Ø 54 BMT 44 BMT 55 BMT 65 OKUMA VDI 40 BMT 55 BMT 60 BMT45 SP QTN 3 VDI 50 QTS SMART BMT68 Turret VDI 30 L= 130,25 Victor Takisawa Taiwan NZ T05 pag. G1 GOODWAY BMT 75 Victor Hwacheon Victor Takisawa Japan Samsung from P. 5.51 to P. 5.54 from P. 5.40 to P. 5.44 Goodway NL NLX DMG MORI Goodway Samsung Takisawa Taiwan DOOSAN Samsung Hyundai WIA BMT 65 Victor Victor Jyoti Hwacheon Spinner Samsung Hyundai WIA Hardinge Turret from P. 5.122 to P. 5.125 BMT 40 from P. 5.55 to P. 5.69 Haas Hardinge Jyoti DMG MORI Goodway VDI Manufacturer from P. 5.127 to P. 5.133 DOOSAN DIN 1809 BIGLIA T05 pag. from P. 5.75 to P.5.78 BARUFFALDI Turret from P. 5.79 to P. 5.90 DIN 5482 Manufacturer from P. 5.135 to P. 5.138 DIN 5480 DOOSAN from P. 5.33 to P. 5.39 T05 pag. from P. 5.149 to P. 5.156 Turret from P. 5.91 to P. 5.106 from P. 4.11 to P. 4.44 from P. 5.21 to P. 5.32 Manufacturer from P. 5.49 to P. 5.51 T05 pag. VDI25 SP SPINNER BARUFFALDI VDI 30 BARUFFALDI VDI 40 BARUFFALDI VDI 50 TAKISAWA JAPAN BMT 60 TAKISAWA TAIWAN BMT 60 TSUGAMI BMT 65 MADE in ITALY 12

A WIDE RANGE OF DRIVEN TOOLS FOR CNC LATHE WITH AN UNBEATABLE PRICE AND QUALITY RATIO DRIVEN TOOLS SX Upgrade your lathe and boost productivity R DISCOVE SCAN TOERF. TYPE P H HIG DX HIGH PERFORM ANCE Models Available (+ torque, + RPM ) Left - Right Which is your machine model ? We Bet It Is On Our Estore! GERARDI 1 What brand and model of lathe are you looking for? DOOSAN / HARDINGE / GOODWAY / DMG MORI / MIYANO ecc... 2 Which kind of turret has your lathe? VDI / BMT55 / BMT65 ecc... Check out our estore, with two simple questions you will find all the Driven Tools suitable for the lathe you have ! Int. Coolant Direction of rotation same as machine spindle Direction of rotation opposite to machine spindle Both direction of rotation to machine spindle available * Nm: The torque value, expressed in Nm, is the maximum allowed. Prolonged use at this value can damage the driven tool; for longer life and less wear, it is recommended to keep it below this limit. BMT COMPATIBLE WITH DOOSAN / HARDINGE / SAMSUNG / HWACHEON / HYUNDAI WIA / VICTOR / HAAS / SPINNER. BMT 65 ALSO COMPATIBLE WITH HAAS LATHES! Type BMT Code ER H Max Nm* Rpm LIST PRICE € SPECIAL OFFER € BMT COMPATIBLE WITH DOOSAN / HARDINGE / SAMSUNG / HWACHEON / HYUNDAI WIA / VICTOR / HAAS / SPINNER. BMT 65 ALSO COMPATIBLE WITH HAAS LATHES ! Type BMT Axial 45 99.DS.A03 25 57,2 35 8000 1.085 839 Radial Axial 45 99.DS.A04 25 57,2 35 8000 1.238 929 Radial Axial Axial Axial Axial 55 99.DS.A01 55 25 57,2 40 99.DS.A02 65 HAAS READY! 65 HAAS READY! 25 57,2 40 Radial 899 8000 1.306 Radial 979 8000 1.432 65 HAAS READY! 65 HAAS READY! 65 HAAS READY! 65 Nm* Rpm LIST PRICE € SPECIAL OFFER € ER Max 99.DS.A12C 25 70 40 8000 2.529 1.899 99.DS.A51C 32 72 70 6000 2.247 1.699 99.DS.A52C 32 72 70 6000 2.661 1.999 99.DS.A73C 32 100 70 6000 2.426 1.899 99.DS.A74C 32 100 70 6000 2.847 2.199 99.DS.A41 32 72,5 70 6000 1.338 1.049 Radial 99.DS.A42 32 72,5 70 6000 1.539 1.179 Radial 75 99.DS.A38C 40 60 100 6000 3.477 2.649 Radial 75 99.DS.A39C 40 60 100 6000 3.172 3.099 Adj ±90° 45 99.DS.A16 20 65 15 8000 4.933 3.899 Adj ±90° 45 99.DS.A17 20 65 15 8000 6.417 4.699 Adj ±90° 55 99.DS.A23 20 65 15 8000 4.933 3.899 Adj ±90° 55 99.DS.A66 20 65 15 8000 6.417 4.699 99.DS.A64 25 75 25 6000 5.483 4.299 99.DS.A65 25 75 25 6000 7.086 5.199 Adj ±90° 75 99.DS.A47 25 75 25 6000 5.483 4.299 Adj ±90° 75 99.DS.A48 25 75 25 6000 7.086 5.199 Axial 75 99.DS.A34 40 90,2 100 6000 1.572 1.249 Axial 75 99.DS.A35 40 90,2 100 6000 1.806 1.399 Radial 45 99.DS.A07C 25 65 35 8000 1.914 1.499 Radial 45 99.DS.A08C 25 65 35 8000 2.300 1.799 Radial 55 99.DS.A11C 25 70 40 8000 2.140 1.599 Adj ±90° H Adj ±90° H H BMT attachment with standard tenon BMT h3 d d1 d2 t f3 2 YEARS WARRANTY 65 HAAS READY! 65 HAAS READY! Driven Tools with bigger tenon available on request Code example with Bigger Tenon: 99.DS.A03T c1 d d1 d2 f1 f2 f3 i2 t t2 h4 45 15 Ø45 35 14 58 58 10 84 60 40 75 75 6 8,5 - 55 15 Ø55 40 16 64 64 14 104 75 30 85 85 8 8,5 9,5 65 18 Ø65 45 18 70 73 15 112 83 32 94 94 10 14 75 25 Ø75 55 23 90 90 15 110 80 43 112 112 14 15 - - - 85 25 Ø85 65 33,5 100 100 18 140 100 43 125 125 16 20 - - - EXPIRES DATE: 31.07.26 h1 h2 h3 i1 N ØM - - 8 29 15 10 29 MADE in ITALY N t1 HAAS READY! M h2 c1 h1 i1 f1 i2 f2 55 H Code h4 13

A WIDE RANGE OF DRIVEN TOOLS FOR CNC LATHE WITH AN UNBEATABLE PRICE AND QUALITY RATIO DRIVEN TOOLS Upgrade your lathe and boost productivity Int. Coolant Direction of rotation same as machine spindle SX R DISCOVE SCAN TOERF. TYPE P H HIG DX HIGH PERFORM ANCE Models Available (+ torque, + RPM ) Left - Right Direction of rotation opposite to machine spindle Both direction of rotation to machine spindle available * Nm: The torque value, expressed in Nm, is the maximum allowed. Prolonged use at this value can damage the driven tool; for longer life and less wear, it is recommended to keep it below this limit. DIN 5 4 8 0 VDI - DIN69880 Type VDI Code ER H * In case of order specify always left or right orientation you need * Rpm Nm CORPO MONOBLOCCO NICHELATO BIGLIA BMT55: B301 / 445 / 455 / 470 / 501 (Y-S) 510 / 545 / 550 / 565 / 650 / 658 / 1200 / 446 / 465 / 745 / 765 / B750 / 1250 16 STAZIONI PREZZO SPECIAL LISTINO € OFFER € Axial 30 99.ST.8003 25 66 32 6000 Axial 30 99.ST.8011 25 66 32 6000 1.245 963 Type BMT 779 Biglia Code Code ER H * Nm SPE- Rpm LIST CIAL PRICE OF€ FER € 979 Axial 55 99.BG.A01 10.57.88.00 25 70 47 6000 932 699 932 699 Axial 40 99.ST.8005 32 95 63 6000 1.205 999 Axial 55 99.BG.A02 T.134-00061 32 70 47 6000 Axial 40 99.ST.8013 32 95 63 6000 1.574 1.229 Axial 55 99.BG.A03 T.134-00071 32 70 47 6000 1.289 949 Radial 30 99.ST.8030 25 55 32 6000 2.023 1.599 Radial 55 99.BG.A05 10.57.87.00 25 70 47 6000 1.745 1.249 Radial 30 99.ST.8038 25 55 32 6000 2.327 1.829 Radial 55 99.BG.A06 T.134-00062 32 70 47 6000 1.745 1.249 Radial 30 99.ST.8031 25 85 32 6000 2.119 1.699 Radial 55 99.BG.A07 T.134-00072 32 70 47 6000 2.288 1.649 Radial 30 99.ST.8032 25 100 32 6000 2.159 1.749 Radial 55 99.BG.A08 T.134-00076 25 100 47 6000 1.962 1.399 Radial 30 99.ST.8039 25 85 32 6000 2.418 1.999 Radial 55 99.BG.A09 T.134-00077 32 100 47 6000 1.962 1.399 Radial 30 99.ST.8040 25 100 32 6000 2.924 2.399 Radial 55 99.BG.A10 T.134-00088 32 100 47 6000 2.288 1.649 Radial 40 99.ST.8033 32 100 63 6000 2.558 1.999 55 99.BG.A15 T.134-00025 16 60 16 6000 4.022 2.849 Radial 40 99.ST.8041 32 100 63 6000 2.938 2.299 55 99.BG.A16 T.134-00057 20 60 16 6000 4.022 2.849 DIN 5 4 8 2 VDI - DIN69880 94 32 6000 909 779 Axial 30 99.ST.8201 Axial 30 99.ST.8207 25 94 32 6000 1.220 979 Axial 40 99.ST.8203 32 115 63 5000 1.094 899 Axial 40 99.ST.8208 32 115 63 5000 1.415 1.129 Radial 30 99.ST.8217 25 55 32 6000 1.822 Radial 30 99.ST.8223 25 55 Radial 40 99.ST.8220 32 Radial 40 99.ST.8226 32 BARUFFALDI 25 * In case of order specify always left or right orientation you need Adj ±90° DMGMORI Code ER Axial 99.MS.A28 32 1.449 Axial 99.MS.A29 32 6000 2.127 1.699 Radial 100 63 5000 2.182 1.699 Radial 100 63 5000 2.552 1.999 VDI - DIN69880 Type SL/ZL 150, 153, 154 (MC / SMC / Y / SY) DL 15, 150 (MC) NLX 1500 - 2000 - 2500 - 3000 12 Posizioni NZ 1500 - 2000 - 3100 - 3150 - 3200 16 Posizioni * In case of order specify always left or right orientation you need H Max * Rpm Nm 70 6000 1.404 1.199 32 70 6000 1.846 1.599 99.MS.A33 32 55 70 6000 2.208 1.899 99.MS.A34 32 55 70 6000 2.649 2.299 Axial 99.MS.A59 32 89,9 60 10.000 Axial 99.MS.A62 40 99.MS.A60 32 89,9 60 10.000 Axial SL/ZL DL NLX 92 60 10.000 Axial 99.MS.A63 40 92 60 10.000 32 6000 1.253 979 Radial 99.MS.A72 32 90 60 10.000 117 63 5000 1.133 929 Radial 99.MS.A76 40 90 60 10.000 32 115 63 5000 1.461 1.179 Radial 99.MS.A73 32 90 60 10.000 99.BF.0021 25 55 32 6000 1.871 1.499 Radial 99.MS.A77 40 90 60 10.000 30 99.BF.0027 25 55 32 6000 2.191 1.749 Axial 99.MS.A101 25 84,3 50 12.000 Radial 40 99.BF.0024 32 100 63 5000 2.247 1.749 Axial 99.MS.A103 32 89,2 50 12.000 Radial 40 99.BF.0030 32 100 63 5000 2.632 2.049 Axial 99.MS.A102 25 84,3 50 12.000 Axial 99.MS.A104 32 89,2 50 12.000 Radial 99.MS.A106 25 85 50 12.000 779 Radial 99.MS.A108 32 85 50 12.000 99.MS.A107 25 85 50 12.000 99.MS.A109 32 85 50 12.000 30 99.BF.0003 25 94 32 6000 Axial 30 99.BF.0010 25 94 Axial 40 99.BF.0005 32 Axial 40 99.BF.0011 Radial 30 Radial DIN 1 8 0 9 VDI - DIN69880 940 * In case of order specify always left or right orientation you need 909 Axial 30 99.DP.0903 25 94 32 6000 Axial 30 99.DP.0910 25 94 32 6000 1.220 979 Radial Axial 40 99.DP.0905 32 115 63 5000 1.094 879 Radial Axial 40 99.DP.0911 32 115 63 5000 1.415 1.129 Radial 30 99.DP.0919 25 55 32 6000 1.822 1.449 Radial 30 99.DP.0925 25 55 32 6000 2.127 1.699 Radial 40 99.DP.0922 32 100 63 5000 2.182 1.699 Radial 40 99.DP.0928 32 100 63 5000 2.552 1.999 2 YEARS WARRANTY SPECIAL OFFER € 55,5 ÷60 55,5 ÷60 779 Axial LIST PRICE € NLX NZ NZ 1.312 1.099 1.940 1.429 2.808 2.099 3.143 2.349 1.312 1.049 1.940 1.479 2.808 2.099 3.143 2.349 H H EXPIRES DATE: 31.07.26 H MADE in ITALY 14

A WIDE RANGE OF DRIVEN TOOLS FOR CNC LATHE WITH AN UNBEATABLE PRICE AND QUALITY RATIO DRIVEN TOOLS Upgrade your lathe and boost productivity Direction of rotation same as machine spindle Int. Coolant SX R DISCOVE SCAN TOERF. TYPE P H HIG DX HIGH PERFORM ANCE Models Available (+ torque, + RPM ) Left - Right Direction of rotation opposite to machine spindle Both direction of rotation to machine spindle available * Nm: The torque value, expressed in Nm, is the maximum allowed. Prolonged use at this value can damage the driven tool; for longer life and less wear, it is recommended to keep it below this limit. HAAS * Presa di moto intercambiabile per le varie tipologie di torrette Haas Type Code ER H Max * Rpm h1 Nm LIST PRICE € NAKAMURA-TOME SPECIAL OFFER € 749 Type BMT VDI 75 117,5 63 6000 1.238 899 Axial 32 75 104,8 63 6000 749 32 75 104,8 63 6000 1.238 899 99.HA.596352 32 75 130,25 63 6000 749 Axial 99.HA.590082 32 75 117,5 63 6000 Axial 99.HA.590082B 32 Axial 99.HA.590083 Axial 99.HA.590083B Axial 993 993 993 BMT44 WT100 -TW1 BMT55 SUPER NTJ-NTJX/NTM 3/TMC 18/ TW10/SC150-250/WT150-250/WTW 150/WTS 150/WT100 Code ER H Max * Rpm Nm LIST PRICE € SPECIAL OFFER € 994 799 44 99.NK.A40 25 57,2 40 6000 Axial 44 99.NK.A43 25 57,2 40 6000 1.136 899 Axial 55 99.NK.A03 32 72,2 63 6000 1.043 849 Axial 55 99.NK.A04 32 72,2 63 6000 1.607 1.299 Axial 99.HA.596352B 32 75 130,25 63 6000 1.238 899 Radial 44 99.NK.A50 25 60 40 6000 1.760 1.399 Radial 99.HA.590084 32 75 117,5 63 6000 1.862 1.349 Radial 44 99.NK.A53 25 60 40 6000 2.109 1.699 Radial 99.HA.590084B 32 75 117,5 63 6000 2.352 1.699 Radial 55 99.NK.A13 32 55 63 6000 1.962 1.600 Radial 99.HA.590085 32 75 104,8 63 6000 1.862 1.349 Radial 55 99.NK.A14 32 55 63 6000 2.645 2.099 Radial 99.HA.590085B 32 75 104,8 63 6000 2.352 1.699 Radial 99.HA.596353 32 75 130,25 63 6000 1.862 1.349 Radial 99.HA.596353B 32 75 130,25 63 6000 2.352 1.699 OKUMA Axial MAZAK QTN3 QUICK TURN NEXUS QTN 300 / 350 / 400 / 450 - SQT 28 / 30 300 - QTN2 12 Posizioni QUICK TURN NEXUS QTN 200 / 250 SUPER QUADREX TURN SQT 15/18 - 200 / 250 - SMART QTS1 - BMT68 QUICK TURN SMART QTS 100M / 200M QT COMPACT 100M - 200M - 300M * Rpm Nm LIST PRICE € SPECIAL OFFER € BMT60: SPACE TURN LB 200EX/LB 2500EX/LB3000EX/GENOS SERIES L300-MW/ MULTUS U3000/U40007/LU3000EX M/MY VDI40: OKUMA CAPTAIN L370 M - ES L10 M - GENOS L300, L3000-E M/MY (VDI40) LB 300 MW - LB/LU 300 MY - LB/LU 300, 3000 M (VDI40) 60 99.OK.A80 32 79 60 6000 1.772 1.299 Axial 60 99.OK.A81 32 79 60 6000 2.249 1.599 Radial 60 99.OK.A82 32 70 60 6000 3.201 2.299 Radial 60 99.OK.A83 32 70 60 6000 3.813 2.749 Axial 40 99.OK.A18 32 98,6 70 6000 2.045 1.499 Axial 40 99.OK.A23 32 98,6 70 6000 1.900 1.599 Type Code ER Off. Axis 99.MZ.A71 40 145 100 4000 3.486 3.100 Radial 40 99.OK.A19 32 70 60 6000 3.950 2.999 Off. Axis QTN 99.MZ.A72 40 145 100 4000 3.813 3.450 Radial 40 99.OK.A25 32 70 60 6000 4.359 3.149 Radial 3 H 99.MZ.A75 40 160 100 4000 3.596 3.200 Radial 99.MZ.A81 40 160 100 4000 3.141 3.750 Off. Axis 99.MZ.A58 32 120 80 6000 2.616 1.549 Off. Axis QTN 99.MZ.A59 32 120 80 6000 3.161 2.100 Radial 99.MZ.A65 32 120 80 6000 2.833 1.649 Radial 99.MZ.A66 32 120 80 6000 3.052 1.949 Axial Axial 99.MZ.A03 32 70 60 6000 2.071 1.849 Axial Radial 2 QTS 1 Radial MIYANO TAKISAWA TAIWAN BMT60 EX 380 / 310 / 508 / 510 / 708 / 710 / 910 - EX 2000 M/Y - TC 350 MC - TT 350 MC - NEX 108/110/908/910 - LA 200/250 M/Y - LA 250 YS (15 stations) - FX 800 - MX 800 - VTL 450 M - LX 2500 M/Y LIST PRICE € Code ER H * Rpm Nm 60 99.TK.A12 32 93 50 6000 1.574 1.149 Axial 60 99.TK.A13 32 93 50 6000 2.324 1.699 Type BMT SPECIAL OFFER € 99.MZ.A06 32 70 60 6000 2.507 2.300 Radial 60 99.TK.A02 32 90 50 6000 3.296 2.399 99.MZ.A09 32 80 60 6000 2.833 2.600 Radial 60 99.TK.A05 32 90 50 6000 3.500 2.549 99.MZ.A10 32 80 60 6000 3.052 2.799 TSUGAMI Ø 45: WT100 -TW1 Ø 54: WT100 -TW1 ER H * Rpm Nm LIST PRICE € Type Ø Code Axial 45 99.MY.A02 25 57,6 35 6000 Axial 45 99.MY.A03 25 57,6 35 6000 1.074 Axial 54 99.MY.A09 Axial 54 99.MY.A10 Radial 45 99.MY.A05 25 65 35 6000 1.582 Radial 45 99.MY.A06 25 65 35 6000 2.579 Radial 54 99.MY.A11 32 75 60 6000 2.399 Radial 54 99.MY.A12 32 75 60 6000 Max SPECIAL OFFER € BMT 65: M06D / M06SD / M06SY / M08SD / M08SY Type BMT Code ER Max H * Rpm Nm 749 Axial 65 99.TS.A01 25 60 40 8000 899 Axial 65 99.TS.A03 32 60 40 8000 32 79,4 60 6000 1.043 849 Axial 65 99.TS.A02 25 60 40 8000 32 79,4 60 6000 1.197 949 Axial 65 99.TS.A04 32 60 40 8000 1.300 Radial 65 99.TS.A08 25 65 40 8000 1.749 Radial 65 99.TS.A10 32 65 40 8000 1.899 Radial 65 99.TS.A09 25 65 40 8000 1.849 Radial 65 99.TS.A11 32 65 40 8000 2 YEARS WARRANTY 896 2.318 EXPIRES DATE: 31.07.26 MADE in ITALY LIST PRICE € SPECIAL OFFER € 1.636 1.199 2.249 1.649 2.656 1.949 3.268 2.449 15

Ideal for Vertical & Horizontal CNC BT40 standard shank included ANGLE HEADS INTEGRAL SERIES MODULAR SERIES Maximum hardness and rigidity thanks the case hardened and ground shank and shaft. Interchangeable shanks to fit any machine spindle. CLASSIC LINE EVOLUTION LINE WITH & WITHOUT INTERNAL COOLANT. WITH & WITHOUT INTERNAL COOLANT. Automatic Tool Change Automatic Tool Change STANDARD TYPE 1 (Ø90) Model ER Rpm Nm Max LIST PRICE € SPECIAL OFFER € LIST PRICE € SPECIAL OFFER € LONG BODY STANDARD LONG BODY TYPE 1 (Ø102) Model ER Rpm Nm Max LIST PRICE € SPECIAL OFFER € LIST PRICE € SPECIAL OFFER € G90 7 ER-11 10.000 5 3.757 3.399 3.930 3.549 F90 7 ER-11 10.000 11 3.750 3.399 4.151 3.749 G90 10 ER-16 10.000 10 3.040 2.749 3.800 3.449 F90 10 ER-16 10.000 14 3.105 2.799 3.853 3.449 G90 16 ER-25 3.706 3.349 4.569 4.149 F90 16S ER-25 8.000 3.814 3.449 - - TYPE 2 (Ø110) ER-32 4.000 40 TYPE 2 (Ø128) 3.919 3.549 4.898 4.399 TYPE 3 (Ø170) G90 S40 ISO / CAT / BT40 4.000 140 5.646 4.999 6.916 6.249 ER-25 5.000 55 3.825 3.449 4.749 4.299 F90 20 ER-32 3.500 90 4.275 3.849 5.624 5.049 4.949 4.449 - - TYPE 3 (Ø157) F90 S40 We Offer the Best Advantages! ISO/BT 2.500 165 40 H ØMax (Tabella-Table) All options available with 10% savings F90 16 Phone support included in the price 15 = Ø18 23 = Ø28 = = A* 1 13 S Design of the spacer for machine tool installation included (Please send us the spindle drawing) B X Perno di sgancio Release pin Free Stop Block included Filo cono Gauge Line *A Perno Standard Pin 21mm Ø18 / 24,5mm Ø28 Tappo / Cap 2 YEARS WARRANTY EXPIRES DATE: 31.07.26 GERARDI SPA via Giovanni XXIII, 101 - 21015 LONATE POZZOLO (VA) Italia - Tel. +39.0331.303911 - Fax +39.0331.301534 gerardi@gerardispa.com - www.gerardi.it Perno Tipo Pin type 0-1-2-3 4 Dettaglio perno Pin detail Tacca di riferimento Referent point Always consider the available options Perno Tipo Pin type A* 1 13 S G90 20 38 15 24 2 8.000 MADE in ITALY